Scroll Top

How a Gigli Saw Works

The parts of a Gigli saw, how the wire cuts bone, and the basics of technique and care.

Request bulk priceSee the Gigli saw set
How does a Gigli saw work? Several stainless steel strands are twisted into a wire, and the twists act as fine teeth. The wire is passed around the bone, a handle is hooked into each end loop, and the surgeon pulls the handles in alternating strokes. The wire cuts by friction as it moves back and forth across the bone.

The parts

Twisted wireThe cutting part: strands twisted together form a rough cutting surface
End loopsA closed loop at each end of the wire
T-handlesHooks lock into the loops and give grip and control
Wire guideA passer often used to lead the wire safely around the bone

The basic steps

  1. 1. Protect the soft tissue. Retract and protect the tissue around the bone.
  2. 2. Pass the wire. Lead the wire around the bone, often with a wire guide.
  3. 3. Attach the handles. Hook a T-handle into each end loop.
  4. 4. Cut in a wide V. Pull the handles in smooth, alternating strokes, keeping the wire taut and the angle wide so it does not bind or snap.
  5. 5. Cool and flush. Irrigate with saline to reduce heat and clear bone debris.

How sharp is a Gigli saw?

Sharp enough to cut bone, so handle it with care, but it does not cut like a knife: it works by friction over repeated strokes. A worn or kinked wire cuts slowly and can break, so replace wires as soon as they show wear, or use a single-use sterile Gigli wire for a fresh edge every time.

Care and sterilisation

Clean reusable wires and handles after use, inspect the wire for kinks and frayed strands, and autoclave with your validated steam cycle. Store wires coiled loosely to avoid kinks.

Educational information for healthcare professionals and buyers. Surgical technique must follow training, the device instructions and your institution's protocols.

GERATI Gigli saw range

Gigli saw set with three wires and two T-handles

Gigli saw set

3 wires (30, 50, 70 cm) and 2 handles.

View set →
Gigli saw wire, twisted stainless steel

Gigli saw wires

Spare wires, single to triple twisted.

View wires →
Gigli saw T-handle hooked to wire loop

Gigli saw handles

Stainless steel T-handles, sold in pairs.

View handles →
Single-use sterile Gigli wire close-up

Single-use sterile wire

Sterile, individually packed, one patient.

View single-use wire →

More about the Gigli saw

Bulk Gigli saws for distributors and hospitals

Sets, wires, handles and single-use sterile wires. Bulk price on request.

Email sales@gerati.comWhatsApp +92 300 8610614
FREE WORLDWIDE SHIPPING FOR ORDERS WORTH $500 OR MORE.VIEW PRODUCTS
+